The Bose Soundbar 700 is a powerful audio device known for its exceptional sound quality and sleek design. To enhance your audio experience further, you might want to connect a subwoofer to your Soundbar 700. A subwoofer adds depth and bass to your sound, making movies, music, and games more immersive. In this article, we will guide you through the step-by-step process of connecting a Bose subwoofer to your Soundbar 700.
Step 1: Unboxing the Subwoofer
Begin by unboxing the Bose subwoofer. Inside the package, you will find the subwoofer unit itself and a power cord. Ensure that all the necessary components are present and in good condition.
Step 2: Power Connection
Connect the power cord to the power input on the back of the subwoofer. Plug the other end of the power cord into a power outlet or surge protector. Make sure the power outlet is easily accessible and has a stable power supply.
Step 3: Subwoofer Placement
Choose an appropriate location for your subwoofer. Ideally, it should be placed near the front of the room, preferably on the same side as your Soundbar 700. Keep in mind that the subwoofer needs some space to breathe, so avoid placing it directly against a wall or in a corner.
Step 4: Pairing the Subwoofer
To connect the subwoofer to your Soundbar 700, you need to pair the two devices. Start by ensuring that the Soundbar 700 is turned on and in pairing mode. You can do this by pressing and holding the Bluetooth button on the remote control until the light on the Soundbar begins to blink.
Step 5: Pairing the Subwoofer Wirelessly
Next, on the back of the subwoofer, locate the “Connect” button. Press and hold the “Connect” button until the light on the front of the subwoofer starts to blink. This indicates that the subwoofer is in pairing mode.
Step 6: Establishing the Wireless Connection
Once both the Soundbar and the subwoofer are in pairing mode, they will automatically connect with each other. This process may take a few moments. Once connected, the light on the front of the subwoofer will stop blinking and remain solid.
Step 7: Verifying the Connection
To ensure that the subwoofer is successfully connected, you can perform a quick audio test. Play some audio content through the Soundbar 700 and pay attention to the low-frequency sounds. If you can hear deep bass and feel the vibrations, it means the subwoofer is properly connected and functioning.
Step 8: Adjusting the Subwoofer Settings
The Bose Soundbar 700 allows you to fine-tune the subwoofer settings according to your preferences. Using the Bose Music app or the remote control, navigate to the subwoofer settings menu. Here, you can adjust the subwoofer volume, bass levels, and other parameters to achieve the desired audio balance.
Step 9: Optimizing Placement and Calibration
If you want to further optimize the performance of your subwoofer, Bose offers the ADAPTiQ audio calibration system. This feature helps to adjust the sound output based on your room’s specific acoustics. Follow the instructions provided with the Soundbar 700 to perform the calibration process, ensuring the best possible audio experience.
Conclusion:
Adding a subwoofer to your Bose Soundbar 700 can significantly enhance your audio experience, delivering deeper bass and immersive sound. By following the step-by-step guide above, you can easily connect a Bose subwoofer to your Soundbar 700 and enjoy a more dynamic and captivating audio experience.
Remember, when setting up your Bose subwoofer, it’s important to follow the manufacturer’s instructions and guidelines to ensure optimal performance and avoid any potential issues. With the right setup and configuration, you’ll be able to enjoy your favorite movies, music, and games with rich, deep bass that adds a new dimension to your audio.