Puresound snare wires are renowned for their quality and enhancing the overall sound and sensitivity of a snare drum. If you’ve recently purchased a set of Puresound snare wires and need guidance on how to install them properly, this step-by-step guide will walk you through the process.
Note: Before installing Puresound snare wires, make sure you have the necessary tools on hand, including a drum key and a pair of wire-cutters (if required).
Step 1: Gather the Materials Ensure you have the following materials ready for the installation:
- Puresound snare wires
- Snare drum with snare beds (indentations on the drumhead for snare wire placement)
- Drum key
- Wire-cutters (if needed)
Step 2: Remove the Old Snare Wires (if applicable) If you are replacing existing snare wires, remove them from your snare drum. Unscrew any tensioning screws or release the throw-off mechanism to detach the old wires. Use wire-cutters to cut the snare cord or straps if they are not easily removable.
Step 3: Prepare the Snare Drum Ensure that your snare drum has snare beds. These are shallow indentations or channels on the bottom drumhead where the snare wires sit. Snare beds facilitate proper contact between the snare wires and the drumhead, improving their response and sound.
Step 4: Position the Snare Wires Place the Puresound snare wires on the snare beds of the drumhead. Align the wires so that they are centered and evenly positioned across the width of the snare drum.
Step 5: Attach the Straps or Cord (if applicable) Some Puresound snare wires feature straps or cord that need to be secured to the strainer and butt plate of the drum. Follow the manufacturer’s instructions provided with your specific snare wire model to attach the straps or cord correctly.
Step 6: Adjust the Snare Wire Tension Using a drum key, adjust the tensioning screws or throw-off mechanism to tighten the snare wires. Start with a medium tension and make adjustments based on your preference and the desired sound. Be sure to tighten the snare wires evenly on both sides to maintain balance.
Step 7: Test and Fine-Tune Tap the drumhead near the snare wires with a drumstick to test their responsiveness and sensitivity. Listen for a crisp and articulate snare sound. If necessary, make minor adjustments to the tension or positioning of the snare wires to achieve the desired sound.
Step 8: Secure the Snare Wires Once you’re satisfied with the sound and tension of the snare wires, ensure that all screws, straps, or cords are securely fastened. Double-check that there is no excessive movement or rattling of the wires when the drum is played.
Step 9: Play and Enjoy With the Puresound snare wires properly installed, your snare drum is ready to be played. Experiment with different playing techniques and dynamics to explore the enhanced response and tonal qualities that Puresound snare wires offer.
Installing Puresound snare wires is a straightforward process that can significantly enhance the sound and performance of your snare drum. By following these step-by-step instructions, you’ll be able to install your Puresound snare wires with confidence and experience the benefits they bring to your drumming.