How do you measure a stylus rake angle?

The stylus rake angle is the angle between the stylus cantilever and the record surface. It is important for accurate sound reproduction and stylus wear. The ideal stylus rake angle will vary depending on the type of cartridge and record player. However, most moving magnet (MM) cartridges typically have a stylus rake angle of 92 degrees. Moving coil (MC) cartridges typically have a stylus rake angle of 90 degrees.

To measure the stylus rake angle, you will need a stylus rake angle gauge. You can find these at most audio stores.

Here are the steps on how to measure the stylus rake angle:

1. Place the stylus rake angle gauge on a flat surface.
2. Place the cartridge on the gauge, so that the stylus is resting in the groove.
3. Look through the eyepiece of the gauge and adjust the angle of the cartridge until the stylus is perpendicular to the graticule.
4. The angle that the cartridge is at is the stylus rake angle.

If you are not comfortable measuring the stylus rake angle yourself, you can take your turntable to a qualified technician.

Here are some tips for preventing stylus rake angle problems:

• Keep your records clean and free of dust.
• Use a stylus rake angle gauge to check the stylus rake angle regularly.
• Adjust the stylus rake angle if necessary.
• Take your turntable to a qualified technician for regular maintenance.

By following these tips, you can help ensure that your stylus rake angle is correct and that your records sound their best.

Here are some additional things to keep in mind when measuring the stylus rake angle:

• Make sure that the turntable is level.
• Use a clean, dry record.
• Do not press down on the stylus.
• Be careful not to move the record while you are measuring the stylus rake angle.