If your Jam turntable is not spinning, there are a few things you can do to troubleshoot and fix the issue.
1. Check the power supply
Make sure that the turntable is plugged in and that the power switch is turned on. Also, make sure that the power outlet is working properly. You can try plugging the turntable into a different outlet to see if that fixes the problem.
2. Check the belt
The belt is a rubber band that connects the turntable platter to the motor. If the belt is worn or broken, the platter will not spin. To check the belt, remove the platter and inspect the belt for signs of wear or damage. If the belt is worn or broken, replace it.
3. Check the motor
If the belt is in good condition, the problem may be with the motor. To check the motor, turn on the turntable and listen for any unusual noises. If the motor is making a humming noise, it is likely damaged and needs to be replaced.
4. Check the tonearm
The tonearm is the arm that holds the stylus. If the tonearm is not properly positioned, the platter will not spin. To check the tonearm, make sure that it is resting in the center of the turntable platter. Also, make sure that the tonearm is not damaged.
5. Clean the turntable
A dirty turntable can cause the platter to spin slowly or not at all. To clean the turntable, use a soft cloth and a mild cleaning solution. Be sure to clean the platter, the tonearm, and the stylus.
6. Check the tonearm rest
The tonearm rest is the arm that holds the tonearm when it is not in use. If the tonearm rest is not properly adjusted, the platter will not spin. To check the tonearm rest, make sure that it is level and that it is not touching the tonearm.
7. Check the anti-skate
The anti-skate is a mechanism that helps to keep the tonearm centered on the record. If the anti-skate is not properly adjusted, the platter may not spin. To check the anti-skate, make sure that it is set to the correct weight for your cartridge.
8. Check the RCA cables
The RCA cables are the cables that connect the turntable to your amplifier or receiver. If the RCA cables are not properly connected, the platter will not spin. To check the RCA cables, make sure that they are firmly connected to both the turntable and your amplifier or receiver.
9. Check the grounding wire
The grounding wire is a wire that connects the turntable to the ground. If the grounding wire is not properly connected, the platter may not spin. To check the grounding wire, make sure that it is firmly connected to both the turntable and your amplifier or receiver.
10. Take the turntable to a technician
If you have tried all of the above and the turntable is still not spinning, you may need to take it to a qualified technician for repair.
Additional tips
- If your Jam turntable is new, it may come with a warranty. Check your warranty to see if it covers repairs for a turntable that is not spinning.
- If you are not comfortable troubleshooting and repairing the turntable yourself, you can take it to a qualified technician.
- Be careful when handling the turntable, as it is a delicate instrument.