The Audio-Technica AT-VM95ML is a high-performance moving magnet cartridge that is known for its detailed sound reproduction. The recommended tracking force for the AT-VM95ML is 1.8 to 2.2 grams. This means that the weight of the cartridge should be between 1.8 and 2.2 grams when it is resting on the record groove.
The tracking force is important for two reasons. First, it helps to prevent the stylus from skipping on the record. Second, it helps to ensure that the stylus is properly tracking the record groove, which results in better sound quality.
If the tracking force is too low, the stylus may skip on the record. This can be caused by a number of factors, including a dirty record, a warped record, or a poorly aligned cartridge. If the tracking force is too high, it can damage the record groove.
The best way to determine the correct tracking force for your AT-VM95ML cartridge is to use a tracking force scale. A tracking force scale is a small device that measures the weight of the cartridge when it is resting on the record groove.
Once you have determined the correct tracking force, you can adjust the tracking force on your turntable. The tracking force adjustment is usually located on the tonearm.
Here is a table of the recommended tracking force for different cartridges:
| Cartridge | Recommended Tracking Force |
|---|---|
| Audio-Technica AT-VM95ML | 1.8 to 2.2 grams |
| Audio-Technica AT-VM95E | 1.5 to 1.7 grams |
| Ortofon 2M Red | 1.8 to 2.0 grams |
| Shure M97xE | 1.75 to 1.95 grams |
It is important to note that the recommended tracking force may vary depending on the turntable and the record. If you are not sure what the correct tracking force is for your turntable, it is best to consult the manufacturer’s instructions.
Here are some additional tips for setting the tracking force:
- Make sure that the turntable is level before you adjust the tracking force.
- Use a tracking force scale to measure the weight of the cartridge.
- Make small adjustments to the tracking force until you find the correct setting.
- Be careful not to over-tighten the tracking force adjustment.
By following these tips, you can ensure that your AT-VM95ML cartridge is tracking properly and that you are getting the best possible sound quality.
