If you’re hearing distortion on the high frequencies coming from your turntable, there are a few things you can check to troubleshoot the problem:
- Dirty stylus: The stylus is the needle that reads the grooves in the record. If the stylus is dirty, it can cause distortion on the high frequencies. Clean the stylus with a stylus cleaner.
- Improper tracking force: The tracking force is the amount of pressure that the stylus applies to the record. If the tracking force is too high, it can cause the stylus to dig too deep into the grooves, which can also cause distortion. Check the tracking force with a tracking force scale.
- Misaligned cartridge: The cartridge is the assembly that holds the stylus. If the cartridge is not aligned properly, it can also cause distortion on the high frequencies. Align the cartridge with a cartridge alignment protractor.
- Poor quality record: Some records are simply poorly pressed, which can cause distortion on the high frequencies. If you’re experiencing distortion on all of your records, it may be a problem with the records themselves.
- Damaged stylus: If the stylus is damaged, it can also cause distortion on the high frequencies. If you suspect that the stylus is damaged, you’ll need to replace it.
If you’ve checked all of these things and your turntable is still distorting on the highs, you may need to take it to a qualified technician for further diagnosis.
Here are some additional tips to help you prevent your turntable from distorting on the highs:
- Clean your records regularly. Dirt and dust can build up on the records and cause distortion. Clean your records regularly with a soft cloth and a record cleaning solution.
- Store your records properly. Records should be stored in a cool, dry place. Heat and moisture can warp records, which can cause them to skip.
- Handle your records carefully. Do not drop your records or expose them to excessive force.
By following these tips, you can help to keep your turntable in good condition and prevent it from distorting on the highs.
Here are some additional troubleshooting tips:
- If the distortion is only happening on one record, the record may be dirty or damaged. Try cleaning the record or replacing it.
- If the distortion is happening on all of your records, it may be a problem with your turntable. Try cleaning the stylus or taking the record player to a qualified technician for further diagnosis.
I hope this article helps you troubleshoot the distortion problem with your turntable.
make an article of “Brand new vinyl sounds distorted”
Sure, here is an article on why your brand new vinyl might be distorting:
Brand New Vinyl Sounds Distorted
If you’re hearing distortion on a brand new vinyl record, there are a few possible reasons why this might be happening:
- The record itself may be damaged. This could be due to a manufacturing defect or to damage that occurred during shipping. If the record is visibly warped or scratched, it’s likely that this is the cause of the distortion.
- The stylus on your turntable may be dirty or damaged. A dirty or damaged stylus can’t track the grooves in the record properly, which can lead to distortion.
- The tracking force on your turntable may be too high. If the tracking force is too high, it can put too much pressure on the stylus, which can also lead to distortion.
- Your turntable may not be properly aligned. If the turntable is not aligned properly, it can cause the stylus to track the grooves in the record incorrectly, which can lead to distortion.
If you’ve checked all of these things and your brand new vinyl record is still distorting, you may need to take it to a qualified technician for further diagnosis.
Here are some additional tips to help you prevent your brand new vinyl records from distorting:
- Inspect the record carefully before playing it. Look for any visible damage, such as warps or scratches. If you see any damage, don’t play the record.
- Clean the stylus on your turntable regularly. A dirty stylus can’t track the grooves in the record properly, which can lead to distortion.
- Set the tracking force on your turntable correctly. The tracking force should be set according to the manufacturer’s instructions.
- Have your turntable aligned by a qualified technician. This will ensure that the stylus is tracking the grooves in the record correctly.
By following these tips, you can help to prevent your brand new vinyl records from distorting and enjoy your music to the fullest.
Here are some additional troubleshooting tips:
- If the distortion is only happening on one record, the record may be damaged. Try cleaning the record or returning it to the store.
- If the distortion is happening on all of your records, it may be a problem with your turntable. Try cleaning the stylus or taking the record player to a qualified technician for further diagnosis.
I hope this article helps you troubleshoot the distortion problem with your new vinyl records.
