The Bose QuietComfort 35 (QC35) is renowned for its exceptional noise-canceling capabilities and immersive audio experience. As a wireless Bluetooth headphone, it allows users to pair with multiple devices for seamless connectivity. However, over time, the paired device list may become cluttered, leading to connectivity issues and potential conflicts. To address such problems, Bose has provided a straightforward method to reset the pairing list on the QC35. In this article, we will explore the reasons to reset the pairing list and provide a detailed step-by-step guide to ensure a smooth and hassle-free process.
I. Why Reset the Pairing List on Bose QC35?
- Clearing Connection Issues: Over time, the headphone’s pairing list may accumulate multiple devices, leading to connectivity problems. Clearing the list allows you to start fresh and establish a stable connection with your desired devices.
- Eradicating Conflicts: In some cases, pairing conflicts may occur when the QC35 attempts to connect to multiple devices simultaneously. Resetting the pairing list helps resolve such conflicts and ensures a smooth connection process.
- Factory Reset: Resetting the pairing list is part of a factory reset, which can be beneficial if the headphones encounter complex issues that cannot be resolved through regular troubleshooting.
II. Preparing for the Reset
Before initiating the pairing list reset, ensure the following:
- Charge the QC35: Confirm that your Bose QC35 has sufficient battery power to complete the reset process. Connect the headphones to a power source using the provided USB cable if needed.
- Backup Paired Devices (Optional): If there are specific devices you frequently use with your QC35, consider making a note of their names or backing up their Bluetooth connections to simplify the re-pairing process later.
III. Performing the Pairing List Reset
The process to reset the pairing list on Bose QC35 is relatively simple and involves following these step-by-step instructions:
Step 1: Turn on the QC35 Headphones
Ensure that your Bose QC35 headphones are powered on. If they are already on, power them off and then turn them back on.
Step 2: Enter Pairing Mode
To enter pairing mode, press and hold the “Bluetooth” button on the right earcup for approximately 10 seconds. The headphones will announce, “Bluetooth device list cleared” when the reset is successful.
Step 3: Verify Pairing List Reset
After performing the reset, the pairing list is cleared, and the QC35 headphones are ready to be paired with new devices. The headphones will no longer automatically connect to previously paired devices.
IV. Re-Pairing Devices after Reset (Optional)
If you wish to reconnect previously paired devices after resetting the pairing list, follow these additional steps:
Step 1: Enable Bluetooth on the Device
Enable Bluetooth on the device you want to pair with the QC35 headphones. Ensure that the device is discoverable and ready to connect.
Step 2: Put the QC35 in Pairing Mode
To put the QC35 headphones back into pairing mode, press and hold the “Bluetooth” button again for about 2 seconds. The headphones will announce, “Ready to pair another device.”
Step 3: Pair the Devices
On your device’s Bluetooth settings, you should see “Bose QC35” or a similar identifier listed. Select it to initiate the pairing process. Once the pairing is successful, you will hear an audio confirmation from the headphones.
Step 4: Repeat for Other Devices (If Applicable)
If you have multiple devices to pair, repeat the process outlined in Step 2 and Step 3 for each device.
V. Troubleshooting Pairing Issues
If you encounter any difficulties during the reset or pairing process, consider the following troubleshooting tips:
- Confirm the Bose QC35 is not already connected to another device.
- Ensure the headphones are sufficiently charged and turned on during the pairing process.
- Verify that Bluetooth is enabled on the device you are attempting to pair with.
- Check for any Bluetooth interference or signal blockages that may be hindering the pairing process.
- If the reset and pairing process still fail, try performing a factory reset on the QC35 headphones. This process may vary slightly between different Bose models, so consult the user manual or Bose support for specific instructions.
Conclusion
Resetting the pairing list on Bose QC35 headphones is a simple yet valuable process that helps address connectivity issues and clears any conflicts that may arise from an overloaded pairing list. By following the step-by-step guide provided in this article, users can easily reset the pairing list and establish seamless connections with their preferred devices. Whether you wish to start afresh with a clean pairing list or resolve complex pairing conflicts, this guide empowers you to maintain the exceptional audio experience offered by the Bose QuietComfort 35 headphones.
