A floating bridge is a type of bridge that can move up and down, allowing the player to use the tremolo arm to bend the pitch of the strings. However, this can also make it difficult to keep the guitar in tune. Locking a floating bridge can help to prevent this.
There are a few different ways to lock a floating bridge. One way is to use a tremolo lock. A tremolo lock is a small device that fits between the bridge and the body of the guitar. It prevents the bridge from moving, which can help to keep the guitar in tune.
Another way to lock a floating bridge is to use a piece of wood or plastic. You can cut a piece of wood or plastic to the size of the bridge, and then glue it in place. This will prevent the bridge from moving, and will also help to protect the bridge from damage.
If you do not want to use a tremolo lock or a piece of wood or plastic, you can also lock a floating bridge by adjusting the tension of the springs. The springs are located in the back cavity of the guitar. If you tighten the springs, it will make it more difficult for the bridge to move, which will help to keep the guitar in tune.
However, tightening the springs too much can make it difficult to use the tremolo arm. So, it is important to find a balance between keeping the guitar in tune and being able to use the tremolo arm.
Here are the steps on how to lock a floating bridge using a tremolo lock:
- Remove the strings from the guitar.
- Locate the tremolo lock. It is usually located on the back of the guitar, near the bridge.
- Insert the tremolo lock between the bridge and the body of the guitar.
- Tighten the screws on the tremolo lock.
- Replace the strings on the guitar.
Here are the steps on how to lock a floating bridge using a piece of wood or plastic:
- Remove the strings from the guitar.
- Cut a piece of wood or plastic to the size of the bridge.
- Glue the piece of wood or plastic in place between the bridge and the body of the guitar.
- Replace the strings on the guitar.
Here are the steps on how to lock a floating bridge by adjusting the tension of the springs:
- Remove the strings from the guitar.
- Locate the springs in the back cavity of the guitar.
- Use a screwdriver to tighten the screws on the springs.
- Replace the strings on the guitar.
Here are some tips for locking a floating bridge:
- Make sure that the tremolo lock is properly aligned. If it is not, it may not be able to lock the bridge properly.
- Use a small amount of glue when attaching a piece of wood or plastic to the bridge. Too much glue can make it difficult to remove the wood or plastic later on.
- Be careful not to overtighten the screws on the springs. If you do, it may be difficult to use the tremolo arm.
With a little care, you can easily lock a floating bridge and keep your guitar in tune.
