The Audio-Technica cartridge alignment protractor is a tool used to align a phono cartridge on a turntable. The protractor is a plastic template with a grid on it. The grid is used to align the cartridge so that the stylus is parallel to the record groove.
How to Use the Audio-Technica Cartridge Alignment Protractor
To use the Audio-Technica cartridge alignment protractor, you will need the following:
- A turntable with a removable headshell
- A phono cartridge
- A protractor
- A pencil or pen
- Place the protractor on the turntable platter.
- Place the cartridge in the headshell.
- Loosen the screws that hold the cartridge in place.
- Move the cartridge so that the stylus tip is touching the dot in the center of the protractor.
- Tighten the screws that hold the cartridge in place.
- Use the pencil or pen to mark the position of the cartridge on the protractor.
- Remove the cartridge from the headshell.
- Align the cartridge so that the marks you made on the protractor are parallel to the grid.
- Reattach the cartridge to the headshell.
Benefits of Using a Cartridge Alignment Protractor
Using a cartridge alignment protractor can improve the sound quality of your turntable. When the cartridge is properly aligned, the stylus will track the record groove more accurately. This will result in a cleaner, more detailed sound.
Conclusion
The Audio-Technica cartridge alignment protractor is a simple tool that can help you improve the sound quality of your turntable. If you are serious about your vinyl playback, then a cartridge alignment protractor is a worthwhile investment.
Here are some additional tips for using the Audio-Technica cartridge alignment protractor:
- Make sure that the turntable is level before you begin.
- Use a sharp pencil or pen to mark the position of the cartridge on the protractor.
- Be careful not to move the cartridge while you are marking it.
- If you are not sure how to align the cartridge, there are many resources available online and in print.
I hope this article helps you understand how to use the Audio-Technica cartridge alignment protractor.