Sony ps-lx310bt stylus replacement

Sony ps-lx310bt stylus replacement

The Sony PS-LX310BT is a popular turntable that is known for its good sound quality and ease of use. However, like any other turntable, the stylus will eventually wear out and need to be replaced.

The stylus is the part of the turntable that actually touches the record and converts the grooves into electrical signals. When the stylus wears out, it can cause sound distortion and other problems.

To replace the stylus on the Sony PS-LX310BT, you will need to follow these steps:

  1. Turn off the turntable and unplug it from the power outlet.
  2. Remove the platter from the turntable.
  3. Use a screwdriver to remove the four screws that hold the cartridge in place.
  4. Carefully remove the cartridge from the turntable.
  5. Remove the old stylus from the cartridge.
  6. Insert the new stylus into the cartridge.
  7. Reinstall the cartridge on the turntable.
  8. Replace the platter on the turntable.
  9. Turn on the turntable and plug it back into the power outlet.

Here are some additional tips for replacing the stylus on the Sony PS-LX310BT:

  • Be careful not to damage the cartridge. The cartridge is a delicate piece of equipment, so be careful not to damage it when you are removing it from the turntable.
  • Make sure that the new stylus is the correct size for your turntable. The stylus is a consumable item that should be replaced regularly. A good rule of thumb is to replace the stylus every 500 hours of use.
  • Clean the record before you play it. A dirty record can cause the stylus to wear out prematurely.

By following these tips, you can easily replace the stylus on your Sony PS-LX310BT turntable and keep it sounding its best.

Here are some links to recommended replacement styli for the Sony PS-LX310BT:

I hope this article was helpful. Let me know if you have any other questions.

Leave a Comment

Your email address will not be published. Required fields are marked *