The Audio Technica LP120 is a great turntable for listening to vinyl records. However, it does not come with speakers. So, if you want to listen to your records, you will need to connect the turntable to a pair of speakers.
There are a few different ways to connect the Audio Technica LP120 to speakers. You can use a pair of RCA cables to connect the turntable to an amplifier or receiver. You can also use a pair of powered speakers that have built-in amplifiers.
If you are connecting the turntable to an amplifier or receiver, you will need to make sure that the amplifier or receiver has a phono input. This is a special input that is designed for turntables. If the amplifier or receiver does not have a phono input, you will need to use a phono preamp. A phono preamp is a device that amplifies the signal from the turntable so that it can be played through the amplifier or receiver.
Once you have connected the turntable to the speakers, you can start listening to your records. The Audio Technica LP120 is a great turntable for listening to vinyl records. It will provide you with years of enjoyment.
Here are some additional tips for connecting the Audio Technica LP120 to speakers:
- Make sure that the speakers are compatible with the turntable. Some speakers are not designed to be used with turntables.
- Use high-quality RCA cables. This will ensure that the sound quality is not compromised.
- If you are using a phono preamp, make sure that it is set to the correct input level. This will prevent the sound from being too loud or too quiet.
- Experiment with different speaker placement. This will help you to find the best sound quality for your listening environment.
By following these tips, you can connect the Audio Technica LP120 to speakers and start enjoying your vinyl records.
