To set up two subwoofers with a Denon receiver, you will need:
- Two subwoofers
- Two subwoofer cables
- A Denon receiver
Once you have all of the necessary components, follow these steps:
- Connect the subwoofer cables to the subwoofer outputs on your receiver.
- Connect the other ends of the subwoofer cables to the subwoofer inputs on your subwoofers.
- Set the subwoofer mode on your receiver to “LFE+Main”. This will ensure that the subwoofers receive both the LFE signal from your receiver and the low-frequency signal from your main speakers.
- Set the crossover frequency on your receiver for each subwoofer. The crossover frequency is the point at which the low-frequency signal is handed off from the main speakers to the subwoofers. A good starting point for the crossover frequency is 80 Hz.
- Adjust the level of each subwoofer to taste. You can use the test tone function on your receiver to help you with this.
Once you have completed these steps, your two subwoofers will be set up and ready to use.
Here are some additional tips for setting up two subwoofers with a Denon receiver:
- Place the subwoofers in opposite corners of the room for the best bass response.
- If you are using a subwoofer with a built-in crossover, set the crossover frequency on the subwoofer to “Bypass”. This will ensure that the crossover frequency is set on your receiver.
- If you are using two subwoofers with different frequency responses, you may need to adjust the crossover frequency on each subwoofer to achieve the best sound quality.
- You may need to experiment with the placement and level of the subwoofers to find the best sound quality for your room.
If you are unsure about how to set up two subwoofers with a Denon receiver, please consult your receiver’s manual or contact Denon customer support for assistance.
