No, bass does not get louder with more Hz. In fact, the opposite is often true: lower frequencies are more difficult to hear than higher frequencies, so you need to play them louder to get the same perceived volume.
This is because of the way the human ear works. The human ear is less sensitive to low frequencies than high frequencies. This is due to the structure of the inner ear, which is less efficient at transmitting low frequencies.
Another factor that affects the perceived volume of bass is the Fletcher-Munson curve. The Fletcher-Munson curve is a graph that shows how the human ear perceives loudness at different frequencies. The curve shows that the human ear is most sensitive to frequencies in the 3-4 kHz range. This is why vocals and other high-pitched instruments often sound louder than bass instruments.
So, if you want to make your bass sound louder, you need to play it louder or use equalization (EQ) to boost the low frequencies. However, be careful not to boost the bass too much, as this can make your mix sound muddy.
Here are some tips for getting louder bass in your mixes:
- Use a subwoofer. A subwoofer is a speaker that is specifically designed to reproduce low frequencies. A subwoofer can help to increase the perceived volume of bass in your mixes.
- Use EQ to boost the low frequencies. You can use an EQ to boost the frequencies below 80Hz. Be careful not to boost the bass too much, as this can make your mix sound muddy.
- Use sidechain compression to create space between the kick drum and the bass. This can help both instruments to stand out more in the mix. To do this, you would route the kick drum to the compressor of the bass guitar track. Then, you would set the compressor to duck the bass guitar whenever the kick drum hits. This will help the kick drum to stand out more and create a more punchy low end.
- Mix in a room with good acoustics. A room with good acoustics will have a more even bass response than a room with poor acoustics. If possible, try to mix in a large room with few reflective surfaces.
In addition to the above, here are some other tips for getting louder bass in your mixes:
- Use a spectrum analyzer to visualize the frequency content of your mix and identify areas where you may need to make EQ adjustments. For example, if you see a lot of energy in the low end, you may need to cut some frequencies to avoid making the mix sound muddy.
- Experiment with different EQ settings and techniques. There is no right or wrong way to EQ bass, so it’s important to experiment and see what sounds best to your ears.
- Use reference tracks. Listen to other tracks that have the kind of bass sound you’re looking for, and try to replicate that sound in your own mixes.
By following these tips, you can learn how to get louder bass in your mixes and create a solid and punchy low end.
It is important to note that there is a difference between perceived loudness and actual loudness. Perceived loudness is how loud something sounds to the human ear, while actual loudness is the actual sound pressure level (SPL) of a sound.
If you are trying to achieve the loudest possible bass sound, you will need to increase the SPL of the bass frequencies. This can be done by using a subwoofer, increasing the gain of the bass instruments, or using EQ to boost the low frequencies.
However, it is important to be mindful of the fact that increasing the SPL of the bass frequencies can also increase the risk of hearing damage. It is important to listen to music at a safe volume level, especially if you are listening to music with a lot of bass.
