Record players are a complex system of mechanical and electrical components, so it’s no surprise that they can sometimes have problems. If your 1 by One record player is not playing properly, there are a few things you can do to troubleshoot the issue.
Basic Troubleshooting
Before you start troubleshooting your record player, it’s a good idea to check the basics:
- Make sure the record player is plugged in and turned on.
- Check the RCA cables to make sure they are properly connected to the record player and your speakers or amplifier.
- Try playing a different record. If the other record plays without any problems, then the issue is likely with the first record.
- Clean the stylus (needle) with a stylus brush. A dirty stylus can cause a variety of problems, including distorted sound and skipping.
Common Troubleshooting Issues
Here are some common troubleshooting issues and solutions for 1 by One record players:
No sound
If you’re not getting any sound from your record player, the first thing to check is the RCA cables. Make sure they are properly connected to both the record player and your speakers or amplifier. If the cables are properly connected, try cleaning the stylus. If you’re still not getting any sound, the problem may be with the cartridge, preamp, or speakers.
Distorted sound
Distorted sound can be caused by a variety of things, including a dirty stylus, a worn cartridge, or a problem with the tracking force or antiskate setting. To fix distorted sound, try cleaning the stylus and replacing the cartridge if it is worn. You can also try adjusting the tracking force and antiskate settings.
Skipping
Skipping can be caused by a dirty stylus, a damaged record, or a problem with the tracking force or antiskate setting. To fix skipping, try cleaning the stylus and replacing the record if it is damaged. You can also try adjusting the tracking force and antiskate settings.
Slow or fast platter speed
If the platter is spinning too slowly or too quickly, the problem may be with the belt. The belt is a rubber band that connects the motor to the platter. If the belt is worn or damaged, it will need to be replaced.
Advanced Troubleshooting
If you’ve tried all of the basic troubleshooting steps and you’re still having problems with your 1 by One record player, you may need to take it to a qualified technician for further troubleshooting and repair.
Here are some additional troubleshooting tips:
- If you’re hearing a humming or buzzing sound, it may be a grounding issue. Try connecting the record player to a different outlet or using a ground loop isolator.
- If you’re hearing feedback, it may be because the speakers are too close to the record player. Try moving the speakers further away.
- If you’re having problems with the tonearm, it may be bent or damaged. This is a delicate component, so it’s best to take it to a qualified technician for repair.
Conclusion
If you’re having problems with your 1 by One record player, there are a few things you can do to troubleshoot the issue. Start by checking the basics, such as the RCA cables and the stylus. If you’re still having problems, try some of the more advanced troubleshooting tips listed above. If you’re not comfortable troubleshooting the issue yourself, take the record player to a qualified technician for further assistance.
