The Audio Technica AT-LP120 is a highly regarded turntable that is popular among audiophiles and music enthusiasts. It is a high-quality turntable that provides an excellent listening experience. However, as with any electronic device, issues may arise that require troubleshooting and maintenance. One common issue that can occur with the Audio Technica AT-LP120 is a blown fuse. In this article, we will guide you through the process of replacing the fuse in your Audio Technica AT-LP120 turntable.
Before we begin, it’s important to note that replacing a fuse can be dangerous and should only be attempted by those with experience working with electronics. If you’re not confident in your ability to replace the fuse yourself, we recommend seeking the assistance of a professional.
Step 1: Gather the Necessary Tools and Materials
To replace the fuse in your Audio Technica AT-LP120, you will need a few tools and materials, including:
- A replacement fuse
- A screwdriver
- A pair of pliers
Step 2: Turn Off the Turntable and Unplug It from the Power Source
Before you begin replacing the fuse, make sure that your turntable is turned off and unplugged from the power source.
Step 3: Remove the Turntable’s Cover
Using a screwdriver, remove the screws that secure the turntable’s cover. Once the screws have been removed, carefully lift the cover off the turntable.
Step 4: Locate the Fuse
The fuse is located near the power input on the back of the turntable. It is a small, cylindrical object that is usually white or black.
Step 5: Remove the Blown Fuse
Using a pair of pliers, gently pull the blown fuse out of its holder. Be careful not to damage the holder or any other components near the fuse.
Step 6: Install the Replacement Fuse
Insert the replacement fuse into the holder. Make sure that it is securely in place.
Step 7: Replace the Turntable’s Cover
Carefully place the turntable’s cover back onto the turntable and secure it with the screws that you removed earlier.
Step 8: Test the Turntable
Once you have replaced the fuse and secured the turntable’s cover, plug the turntable back into the power source and turn it on. Test the turntable to make sure that it is functioning properly.
In conclusion, replacing the fuse in your Audio Technica AT-LP120 turntable is a simple process that can be done with a few basic tools and some careful attention. However, if you are not confident in your ability to replace the fuse yourself, it’s best to seek the assistance of a professional. By following these steps, you can keep your Audio Technica AT-LP120 turntable in top condition and continue enjoying your favorite vinyl records for years to come.