The Victrola VSC-550BT is a popular turntable model that allows you to play vinyl records and connect to Bluetooth-enabled devices. While the turntable is easy to use, there may come a time when you need to replace the fuse. In this article, we will discuss the fuse location on the Victrola VSC-550BT.
Firstly, it’s important to note that the fuse in the Victrola VSC-550BT is not a user-replaceable part. If you suspect that the fuse has blown, you should contact a qualified technician to diagnose and repair the issue.
With that said, the fuse in the Victrola VSC-550BT is located inside the turntable’s housing. To access it, you will need to remove the turntable’s platter and bottom cover.
To remove the platter, grip it firmly on opposite sides and lift it straight up. It may require some force to release it from the spindle. Once the platter is removed, you should see a metal cover over the turntable’s motor. The cover is held in place by several screws, which you will need to remove.
Once the motor cover is removed, you should be able to see the fuse, which is located near the turntable’s power supply. The fuse is a small, cylindrical component with metal caps on each end. It may be labeled with its amperage rating, such as “1.5A” or “2A.”
Again, it’s important to note that the fuse in the Victrola VSC-550BT is not user-replaceable. Attempting to replace the fuse yourself can be dangerous and may cause further damage to the turntable. If you suspect that the fuse has blown, we recommend contacting a qualified technician for assistance.
In summary, the fuse in the Victrola VSC-550BT is located inside the turntable’s housing, near the power supply. To access it, you will need to remove the turntable’s platter and bottom cover. However, we strongly advise against attempting to replace the fuse yourself and instead recommend seeking professional assistance.