A Floyd Rose is a type of floating bridge that allows for a wide range of vibrato effects. However, this can also make it difficult to keep the guitar in tune, especially when using the dive bomb technique.
If you want to make your Floyd Rose guitar a fixed bridge, you can block the bridge so that it can no longer move. This will make it easier to keep the guitar in tune and will also remove the risk of the bridge going out of alignment.
To make a Floyd Rose a fixed bridge, you will need a few tools:
- A screwdriver
- A drill
- A piece of wood or plastic
- Wood glue
Here are the steps on how to make a Floyd Rose a fixed bridge:
- Remove the strings from the guitar.
- Locate the springs in the back cavity of the guitar.
- Use a screwdriver to loosen the screws on the springs.
- Remove the springs from the guitar.
- Cut a piece of wood or plastic to the size of the bridge.
- Glue the piece of wood or plastic in place between the bridge and the body of the guitar so that it blocks the bridge from moving.
- Replace the strings on the guitar.
Here are some tips for making a Floyd Rose a fixed bridge:
- Make sure that the piece of wood or plastic is properly aligned. If it is not, it may not be able to block the bridge properly.
- Use a small amount of glue when attaching a piece of wood or plastic to the bridge. Too much glue can make it difficult to remove the wood or plastic later on.
- Be careful not to overtighten the screws on the springs. If you do, it may be difficult to use the tremolo arm.
With a little care, you can easily make a Floyd Rose a fixed bridge and keep your guitar in tune.
Here are some additional considerations when making a Floyd Rose a fixed bridge:
- If you are using a piece of wood or plastic, make sure that it is a hard wood that will not warp or crack over time.
- If you are using glue, make sure that it is a strong glue that will hold the wood or plastic in place.
- If you are not comfortable working on your guitar, you can take it to a qualified technician to have it made fixed.
Making a Floyd Rose a fixed bridge is a relatively simple process that can be done at home with a few basic tools. By following the steps above, you can easily convert your Floyd Rose guitar into a fixed bridge and keep it in tune for years to come.
I hope this article has been helpful. Let me know if you have any other questions.