Turntables have a number of moving parts, and these parts need to be lubricated to work properly. The type of lubricant you use will depend on the type of bearing in your turntable.
If your turntable has a ceramic bearing, you can use a high-viscosity oil such as sewing machine oil or turbine oil. These oils are thick and will not evaporate easily, which is important for ceramic bearings.
If your turntable has an oil-damped bearing, you can use a low-viscosity oil such as mineral oil or baby oil. These oils are thinner and will not interfere with the damping mechanism in the bearing.
If your turntable has a felt or rubber bearing, you can use a silicone grease. Silicone grease is a non-drying lubricant that will not attract dust or dirt.
No matter what type of lubricant you use, you should only use a small amount. Too much lubricant can actually damage the bearing.
Here are some tips for lubricating your turntable:
- Use the correct type of lubricant: The type of lubricant you use is important. You should use a high-viscosity oil for ceramic bearings, a low-viscosity oil for oil-damped bearings, and a silicone grease for felt or rubber bearings.
- Use a small amount of lubricant: You should only use a small amount of lubricant. Too much lubricant can actually damage the bearing.
- Apply the lubricant to the correct area: The lubricant should be applied to the bearing surfaces. Do not apply the lubricant to the outside of the bearing.
- Allow the lubricant to soak in: After you apply the lubricant, you should allow it to soak in for a few minutes before using the turntable.
By following these tips, you can properly lubricate your turntable bearing and extend its lifespan.
Here are some additional tips:
- Clean the bearing before oiling: It is important to clean the bearing before you oil it. This will remove any dirt or debris that may be preventing the oil from properly lubricating the bearing.
- Wipe away any excess oil: After you have applied the oil, you should wipe away any excess oil. This will prevent the oil from attracting dust and dirt.
- Store the turntable in a clean, dry place: If you store your turntable in a clean, dry place, you will need to oil the bearing less often.
- Inspect the bearing regularly: You should inspect the bearing regularly for signs of wear or damage. If you notice any problems with the bearing, you should have it serviced by a qualified technician.
By following these tips, you can keep your turntable bearing in good condition and extend its lifespan.
