The AT95E is a popular phono cartridge that is known for its accurate sound reproduction. However, one setting that can be tricky to get right is the anti-skate. Anti-skate is a force that is applied to the cartridge to counteract the force of the record’s groove, which can cause the cartridge to skate towards the center of the record. If the anti-skate is not set correctly, it can cause the sound to be distorted or uneven.
What is anti-skate?
Anti-skate is a force that is applied to the cartridge to counteract the force of the record’s groove. The force of the groove is caused by the fact that the record is rotating at a constant speed, but the distance between the grooves increases as the record plays. This creates a force that pulls the cartridge towards the center of the record. Anti-skate is used to counteract this force and keep the cartridge tracking the groove accurately.
How to set anti-skate on AT95E
To set the anti-skate on the AT95E, you will need a tracking force gauge. A tracking force gauge is a device that measures the amount of force that is being applied to the cartridge. Once you have a tracking force gauge, follow these steps to set the anti-skate:
- Set the tracking force to 2 grams.
- Place the tracking force gauge on the cartridge.
- Turn the anti-skate adjustment until the needle on the tracking force gauge reads 0.5 grams.
Setting the anti-skate correctly is an important part of getting the most out of your AT95E cartridge. By following the steps above, you can ensure that your cartridge is tracking the groove accurately and that your sound is distortion-free.
Additional Information
Here are some additional tips for setting the anti-skate on your AT95E:
- If you do not have a tracking force gauge, you can use a piece of paper. Place the paper on the record and then adjust the anti-skate until the needle just starts to drag on the paper.
- If you are still having trouble getting the anti-skate right, you can consult the instructions that came with your turntable.
- It is important to check the anti-skate setting periodically, as it may need to be adjusted if the cartridge wears out or if you change the tracking force.