Floyd rose too stiff

Floyd rose too stiff

A Floyd Rose bridge is a type of floating bridge that allows for a wide range of vibrato effects. However, if the bridge is too stiff, it can be difficult to use the tremolo arm.

There are a few things you can do to fix a Floyd Rose that is too stiff:

  1. Check the spring tension. The spring tension is the amount of force that the springs exert on the bridge, and it helps to keep the bridge in place when the tremolo arm is used. If the spring tension is too high, the bridge will be too stiff to move. To check the spring tension, remove the strings from the guitar and loosen the screws on the springs. You can then adjust the spring tension by turning the screws clockwise to increase the tension and counterclockwise to decrease the tension.
  2. Use lighter strings. Lighter strings will require less force to move the bridge, which can help to make it less stiff. If you are using heavy strings, you may want to consider switching to lighter strings.
  3. Use a tremolo lubricant. Tremolo lubricant is a special lubricant that can be applied to the springs and saddles of a Floyd Rose bridge. This lubricant can help to reduce friction and make the bridge easier to move.
  4. Replace the springs. If the springs on your Floyd Rose bridge are old or damaged, they may be contributing to the stiffness of the bridge. You may want to consider replacing the springs with new ones.

If you have tried all of these things and your Floyd Rose bridge is still too stiff, you may need to take it to a qualified technician for further assistance.

Here are some additional tips for fixing a Floyd Rose that is too stiff:

  • If you are not comfortable working on your guitar, you can take it to a qualified technician for help.
  • When adjusting the spring tension, be careful not to over-tighten the screws. If you over-tighten the screws, it may be difficult to use the tremolo arm.
  • If you are using a tremolo lubricant, be sure to apply it evenly to the springs and saddles.
  • If you are replacing the springs on your Floyd Rose bridge, be sure to use the correct size and type of springs.

By following these tips, you can easily fix a Floyd Rose that is too stiff and get the best possible performance from your guitar.

Leave a Comment

Your email address will not be published. Required fields are marked *