To power two 600 watt RMS subs, you will need an amplifier that can produce at least 1200 watts RMS of power. This is because you want to give your subs enough power to perform at their best, but you don’t want to overdrive them.
Here are a few amplifiers that can power two 600 watt RMS subs:
- Kicker 46CXA1200.1: This amplifier can produce 1200 watts RMS of power at 4 ohms.
- JL Audio JD1000/1: This amplifier can produce 1000 watts RMS of power at 4 ohms.
- Hifonics Brutus BRX1200.1D: This amplifier can produce 1200 watts RMS of power at 1 ohm.
When choosing an amplifier, it is important to consider the following factors:
- Power: The amplifier should have enough power to drive your subs to their full potential.
- Impedance: The amplifier should be able to handle the impedance of your subs.
- Features: Some amplifiers come with additional features, such as room correction, EQ adjustments, and multiple inputs. Consider which features are important to you when choosing an amplifier.
Once you have chosen an amplifier, be sure to take the time to set it up correctly. This will help you to get the best possible performance from your subs.
Here are some tips for setting up an amplifier for two 600 watt RMS subs:
- Wire the subs in parallel. This will reduce the impedance of the subs to 2 ohms, which will allow the amp to produce more power.
- Set the gain on the amp to a moderate level. You can always increase the gain if needed, but it is better to start with a low gain setting and increase it gradually.
- Monitor the temperature of the amp. If the amp starts to overheat, reduce the gain or turn it off.
- Be careful not to overdrive the amp. If the amp is clipping (distorting), reduce the gain or turn it off.
- Use a crossover to filter the subwoofer frequencies from the main speakers. This will help to protect the main speakers from damage.
If you follow these tips, you should be able to use an amplifier to power two 600 watt RMS subs safely and effectively.
