The Audio-Technica AT-LP60XBT is a popular Bluetooth turntable that allows you to enjoy your vinyl records wirelessly through Bluetooth speakers or headphones. However, if you prefer a more traditional audio setup, you can connect your AT-LP60XBT to external speakers for a richer and more immersive listening experience. In this guide, we’ll walk you through the steps to connect your AT-LP60XBT turntable to speakers using both wired and wireless methods.
Wired Connection
Step 1: Gather Your Equipment Before you begin, make sure you have the following equipment ready:
- Audio-Technica AT-LP60XBT turntable
- Powered speakers or an amplifier and passive speakers
- RCA audio cables
- A phono preamp (if your turntable doesn’t have a built-in preamp)
- An available power outlet for the speakers or amplifier
Step 2: Place Your Turntable Set up your AT-LP60XBT turntable on a stable surface near your speakers. Ensure it’s close enough to reach the speakers with your RCA cables.
Step 3: Connect the Turntable to a Phono Preamp (If Needed) If your turntable doesn’t have a built-in phono preamp, connect it to an external phono preamp using RCA cables. Most modern turntables, including the AT-LP60XBT, have a line-level output, so if your speakers or amplifier have a built-in phono stage, you can skip this step.
Step 4: Connect the Phono Preamp (If Used) to Your Amplifier or Powered Speakers Connect the output of the phono preamp to the line input of your amplifier or powered speakers using RCA cables. Make sure to match the red and white connectors to the corresponding input colors.
Step 5: Power On Your Turntable and Speakers Turn on your turntable, the phono preamp (if used), and your amplifier or powered speakers. You’re now ready to play your vinyl records, and the sound will be amplified and delivered through your speakers.
Wireless Connection
Step 1: Pair Your Turntable with Bluetooth Speakers With the AT-LP60XBT’s built-in Bluetooth functionality, you can easily pair it with your Bluetooth speakers. Here’s how:
- Turn on your Bluetooth speakers and put them in pairing mode.
- On your AT-LP60XBT, press and hold the Bluetooth button until the pairing LED starts flashing.
- Select “AT-LP60XBT” from the list of available devices on your Bluetooth speakers or source device.
- Once connected, you can play your records wirelessly through your Bluetooth speakers.
Step 2: Adjust Audio Settings Depending on your Bluetooth speakers, you may need to adjust audio settings for optimal sound quality. Refer to the user manual of your speakers for guidance on adjusting bass, treble, and volume levels.
Step 3: Enjoy Your Music With your AT-LP60XBT turntable connected to your Bluetooth speakers, you can enjoy the warm, analog sound of vinyl records without the need for physical cables.
Conclusion
Whether you prefer a wired or wireless connection, the Audio-Technica AT-LP60XBT turntable offers flexibility in how you listen to your vinyl records. Connecting it to external speakers can significantly enhance your listening experience. By following the steps outlined in this guide, you can enjoy the rich, authentic sound of vinyl through your preferred audio setup. So, go ahead, dust off those records, and start enjoying the music in style!
