The Bose QuietComfort 35 (QC35) headphones are acclaimed for their exceptional noise-cancellation and superior audio performance. However, some users encounter frustrating connectivity issues when attempting to pair their Bose QC35 headphones with their iPhones. If you’re facing difficulties in establishing a connection between your headphones and your iPhone, fear not, as you’re not alone. In this comprehensive troubleshooting guide, we will delve into the common reasons why your Bose QC35 may not be connecting to your iPhone and provide step-by-step solutions to resolve the problem. Let’s dive in and get your headphones connected to your iPhone for an immersive audio experience.
- Enable Bluetooth on Your iPhone: Before attempting to connect your Bose QC35 to your iPhone, ensure that Bluetooth is enabled on your device. Swipe down from the top right corner of your iPhone’s screen to access the Control Center. Look for the Bluetooth icon and make sure it’s turned on (the icon should be blue). If Bluetooth is off, tap the Bluetooth icon to enable it.
- Put Your Bose QC35 in Pairing Mode: To initiate the pairing process, your Bose QC35 headphones need to be in pairing mode. Follow these steps to activate pairing mode:
- Turn on your Bose QC35 headphones by sliding the power switch to the right.
- Locate the Bluetooth button on the headphones, typically located on the right earcup.
- Press and hold the Bluetooth button until the Bluetooth LED indicator starts flashing. This indicates that the headphones are in pairing mode and ready to connect to a device.
- Check for iOS Updates: Outdated iOS software can cause compatibility issues with your Bose QC35 headphones. Ensure that your iPhone’s operating system is up to date. To check for updates, go to Settings > General > Software Update. If an update is available, tap “Download and Install” to update your iOS.
- Forget and Re-Pair Bose QC35: If you have previously paired your Bose QC35 headphones with your iPhone but are experiencing connection issues, try forgetting the device and re-pairing it. Follow these steps:
- Go to Settings on your iPhone.
- Tap Bluetooth.
- Locate your Bose QC35 headphones in the list of paired devices.
- Tap the “i” icon next to your headphones’ name.
- Select “Forget This Device” to remove it from the list.
- Put your Bose QC35 headphones back into pairing mode and reattempt the pairing process.
- Restart Your iPhone and Bose QC35: Sometimes, a simple restart can resolve connectivity issues. Turn off both your iPhone and your Bose QC35 headphones. Then, turn them back on and try to connect again.
- Reset Network Settings on Your iPhone: Resetting your iPhone’s network settings can help resolve Bluetooth-related issues. Here’s how to do it:
- Go to Settings on your iPhone.
- Tap General.
- Scroll down and select Reset.
- Choose “Reset Network Settings.”
- Enter your passcode if prompted, and confirm the reset.
Please note that resetting network settings will remove saved Wi-Fi passwords and VPN configurations.
- Charge Your Bose QC35 Headphones: Low battery levels on your headphones can hinder the pairing process. Ensure your Bose QC35 headphones have sufficient charge before attempting to connect them to your iPhone. Charge the headphones using the provided charging cable and try pairing again.
- Clear Bose QC35 Pairing List: If your Bose QC35 headphones have been paired with multiple devices in the past, they may have trouble connecting to your iPhone. Clear the headphone’s pairing list by following these steps:
- Slide the power switch to the Bluetooth position.
- Press and hold the power switch in the Bluetooth position for at least ten seconds. You will hear the Bluetooth device list cleared.
- Check for Interference: Wireless interference from other Bluetooth devices, Wi-Fi routers, or nearby electronic devices can disrupt the connection between your iPhone and your Bose QC35 headphones. Try pairing the headphones in a different location away from potential sources of interference.
- Perform a Factory Reset on Bose QC35: If none of the above steps have resolved the issue, try performing a factory reset on your Bose QC35 headphones. To do this:
- Slide the power switch to the Bluetooth position.
- Press and hold the power switch in the Bluetooth position for at least ten seconds. Your headphones will power off.
- Turn on the headphones again, and they will be restored to factory settings.
Conclusion: Encountering connectivity issues between your Bose QC35 headphones and your iPhone can be frustrating, but with the troubleshooting tips provided in this guide, you can tackle the problem with confidence. Start by ensuring that Bluetooth is enabled on your iPhone and that your headphones are in pairing mode. Check for iOS updates and try forgetting and re-pairing your Bose QC35. Restart your devices, reset network settings on your iPhone, and charge your headphones to eliminate common issues. If none of these steps resolve the problem, consider clearing the pairing list on your Bose QC35 headphones or performing a factory reset. By following these step-by-step solutions, you can successfully connect your Bose QC35 to your iPhone and immerse yourself in the unparalleled audio experience they offer. Happy listening!
