The two main places to lubricate a turntable are the spindle and the bearing.
- The spindle: The spindle is the axle that the record spins on. It is important to keep the spindle lubricated to prevent it from rusting or corroding. You can use a light oil or silicone lubricant to lubricate the spindle.
- The bearing: The bearing is the part that supports the spindle and allows it to rotate smoothly. It is important to keep the bearing lubricated to prevent it from wearing out. You can use a heavier oil or silicone lubricant to lubricate the bearing.
It is important to use a lubricant that is specifically designed for turntables. Do not use WD-40 or other general-purpose lubricants, as these can damage the delicate parts of the turntable.
To lubricate the spindle, you can use a small brush or cotton swab to apply the lubricant to the spindle. Be sure to wipe away any excess lubricant.
To lubricate the bearing, you can remove the bearing from the turntable and apply the lubricant to the bearing surface. Be sure to reassemble the bearing carefully so that it rotates smoothly.
If you are not comfortable lubricating your turntable yourself, you can take it to a qualified technician. They will be able to lubricate your turntable properly and prevent any damage to the delicate parts.
Here are some other tips for lubricating your turntable:
- Only lubricate the turntable when it is not in use.
- Do not lubricate the stylus.
- Wipe away any excess lubricant.
